13 piece kit of 1 oz. jars.
VividFX, an ultra-violet special effects paint represents a spectacular development for the special effects designer, scenic artists, and night club designer. This range of brilliant fluorescent paints is available in thirteen vibrant fluorescent colors. One of the widest palettes available! VividFX paints have been formulated using the highest quality fluorescent pigments available giving the artist an unparalleled combination of color choice, one coat coverage and hiding, fluorescence and versatility.
VividFX paints are compatible with all other Rosco Scenic paints. Use VividFX paints mixed into standard scenic paint when matching the brightest Pantone colors. VividFX uses the same high quality, water base, vinyl acrylic binder found in Off Broadway paints. It is suitable for use over most surfaces and for interior and exterior* applications.
Rosco's VividFX paints have been designed specifically to meet the demanding needs of the special effects artist. The brilliant pigments used create stunning blacklight effects and intermix cleanly to provide a wide array of intermediate fluorescent hues. Use VividFX wherever eye-catching dramatic special effects painting is desired: For the Special Effects Artists...
The VividFX line of high quality fluorescent paints offers a special effects artist something new and exciting: performance and dependability in a fluorescent paint. With such a wide range of colors VividFX is up to the challenge of almost any project. Whether its a fantastical matte painting, a spectacular scenic effect that transforms under blacklight or just a simple "dayglo" effect, VividFX paint will help create extraordinary results with less work for the artist trying to find just the right color. For the Scenic Artist...
More and more stage designers are creating sets that depend on the use of blacklight. Until now, this meant more work and frustration for the scenic artists who struggle to get an even coverage of paint and a bright enough effect. But with the high pigment saturation, and the fine grind achieved during their manufacturing, VividFX paints brush on smoothly and dry to an even matte finish, in only one coat. And under ultra violet light, these colors really shine. For the Night Club designer...
Night clubs, restaurants, bowling alleys, amusement parks, corporate meetings all are making use of the exciting effects that can be created using fluorescent paints. For these jobs, VividFX is the perfect choice. The color palette is wide, and the performance exceptional. But more importantly, these paints are available wherever the project is happening, anywhere in the United States, anywhere in the world. With over 400 dealers nationwide and offices and distribution networks in over 30 countries around the world, you can be assured that when VividFX is specified in the design, it will be available, everywhere.
CAUTIONS: Do not apply when surface or air temperatures are below 50°F. Keep from freezing. Avoid prolonged contact with skin or breathing of spray. Do not take internally. Use adequate ventilation. KEEP OUT OF REACH OF CHILDREN.All technical data, recommendations and service are accurate to the best of our knowledge. Rosco assumes no responsibility for the results obtained or damage incurred from use by the buyer in whole or in part since method of application and its use is beyond our control.
- Finish: Matte
- Solvent: Water
- Binder Type:Vinyl
- Acrylic Dilution: VividFX should be used straight out of the can. It can be diluted with water if necessary, however, this may reduce the hiding power of the paint. Surface Preparation: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic color effects.
- Application: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin uniform coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge.
- Film Thickness: 2 mil. Dry Film.
- Coverage: Approximately 300 sq. ft. per gallon.
- Average Dry Time: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
- Clean-up Soap and water.
- Shelf Life Minimum 24 months.
- Packaging: 1 oz containers of each color.
- *Fluorescent pigments will degrade from prolonged exposure to ultraviolet light. Avoid direct sunlight when possible.
NOTE: Colors shown are computer approximations. Actual color may vary.
CAUTION: Do not apply when surface or air temperatures are below 50°F. Keep from freezing. Avoid prolonged contact with skin or breathing of spray. Do not take internally. Use adequate ventilation. KEEP OUT OF REACH OF CHILDREN.
All technical data, recommendations and service are accurate to the best of our knowledge. Rosco assumes no responsibility for the results obtained or damage incurred from use by the buyer in whole or in part since method of application and its use is beyond our control.
Fluorescent / VividFx FAQ:
What are Rosco's UV paints made of?
Rosco's Fluorescent and VividFx lines are made of finely ground fluorescent pigments, a vinyl acrylic binder and water.
Can I thin Rosco UV paints with water?
Yes. Rosco Fluorescents and VividFx are water-based paints. They are designed to be used straight from the can for maximum UV effect; the addition of water to them will dilute the fluorescence of the paint under blacklight.
What are the differences between Rosco Fluorescents and Rosco VividFx?
Both lines are made with a vinyl acrylic binder for good adhesion and flexibility. The primary difference is the "pigment load" or amount of pigment in the can. VividFx has a higher pigment content.
Can I mix Rosco Fluorescents and Rosco VividFx with other Rosco paint lines?
Yes. The binders of all the scenic paint lines are compatible with both the UV lines. The fluorescent pigments in the UV lines are especially helpful when an artist is matching bright colors and needs some extra "pop".
Do I need to use a blacklight with the UV paints?
Yes and No. Rosco's UV paints are clean and bright under regular light giving a "dayglo" effect. Using a "blacklight" or Ultraviolet Light Fixture makes the paint fluoresce.