This product can only ship via UPS GROUND SHIPPING ONLY.
Cold Foam is a fine-pore polyurethane foam consisting of 2 components, with good skin structure for facial and body appliances, for 3-dimensional mask effects. Cold Foam is a reaction foam that reaches a volume 5 to 6 times its original size. The set consists of 2 components and a release agent. Simplistic cold foam system for making three dimensional foam prosthetics. Makes approximately 6 qts.
Directions: Separately weigh out the correct amounts of the base component and the reaction component. Then, use a disposable cup to manually mix these two components quickly and thoroughly. Next, immediately pour the finished mixture into a mold onto which a separator agent has been carefully applied. The mold must then be immediately closed and fastened shut with a screw clamp or with fastening straps. After 45 to 60 minutes, the mold can be opened and the foam appliances can be removed from the mold after thorough powdering. Cold Foam SF appliances are bonded in place with Spirit Gum or Special Adhesive B.
Pros-Aide and latex products being shipped during cold weather months have the potential to freeze and then will turn solid. To help avoid this, we suggest shipment via 2nd day or next day service from approximately November through April. However, ordering during these cold weather months is at your own risk and Norcostco will not be responsible for product that has been ruined due to freezing during shipment. These products are stocked at all of our locations and, of course, are available to be picked up.