ETCnomad turns your computer into a lighting controller for Eos family software. Use your computer as a stand-alone controller for programming and show playback, or as a backup or client to Eos and Element lighting systems. ETCnomad is available in two output capacities - Base or Unlocked. Base supports 1024 outputs while Unlocked supports 6144 outputs.
When operating as a client, ETCnomad accesses the full output count of the Eos system to which it is connected. The Base version of ETCnomad can be upgraded to Unlocked by purchasing an after-sale upgrade code.
Features:
• Computer-based lighting control software; Windows 7 or higher and Mac OS 10.14 (Mojave) or later.
• USB key allows output from Eos software on a personal computer
• Net3/ACN/sACN and Art-Net output; DMX/RDM via ETC Gadget II and Gateways
• Show Control and I/O Gateways, OSC and UDP triggers
• ETCnomad can communicate via Ethernet-based lighting protocols (Net3/ACN/sACN and Art-Net) or by use of the ETC Gadget II USB>DMX/RDM converter.
• ETCnomad is compatible with ETC Universal Fader Wings on a PC.
• ETCnomad is compatible with Eos Programming Wings (PC and Mac native).
• ETCnomad is compatible with Eos Motorized Fader Wings 10/20 (PC and Mac native).
• ETCnomad is compatible with Eos Fader Wings 20/40 (PC and Mac native).
• ETCnomad is compatible with OSC controllers.
• ETCnomad also supports connection with third-party USB-MIDI panels via Direct MIDI.
Note: Minimum Hardware Requirements:
Personal Computer (laptop or desktop) with:
- Intel-based multi-core processor with clock frequency higher than 2.0 GHz (2.5GHz for 6144 outputs)
- Windows 7 or higher with >500 MB free disk space
- Screen resolution of at least 1280x1024
- 512 MB of RAM minimum (recommended 1GB - 2048, 2GB - 3072, 4GB-6144)
- 64 MB Video Card
- RJ-45 Ethernet network adapter (required to communicate with a lighting network, DMX output devices)
Macintosh Computer minimum requirements:
- Intel-based multi-core processor with clock frequency higher than 2.0 GHz (2.5GHz for 6144 outputs)
- Mac OS 10.14 (Mojave) or later with >500 MB free disk space
- Screen resolution of at least 1280x1024
- 512 MB of RAM minimum (recommended 1GB - 2048, 2GB - 3072, 4GB-6144)
- 64 MB Video Card
- RJ-45 Ethernet network adapter (required to communicate with a lighting network, DMX output devices)
When ordering an output upgrade, provide the ETCnomad serial number, key ID number, current software version and a valid email address.
Important: ETCnomad Base provides 512 outputs when running Eos 2.8.x or lower and 1024 on Eos 2.9 and higher. ETCnomad does not support ETCNet2/EDMX output. ETCnomad software without a key operates in mirror or offline mode. ETCnomad Key is also compatible with Cobalt and Hog 4 PC.
