Description
The Preset 10 Architectural is a lighting control station capable of storing up to ten presets. These presets are recorded by capturing the output of a DMX512 console. Each preset can then be assigned as unique fade time, from 0 to 999 seconds. Presets are recalled by pressing one of the buttons.
Systems can be created by using one or more stations and a power supply. The solid aluminum faceplate is designed to install over a standard single gang electrical box. Connections to the Preset 10 Architectural are power (2 wires) and DMX512 (3 wires). Power for the Preset 10 can be supplied from a variety of sources, including a 10V class 2 "doorbell" transformer.
The Preset 10 Architectural system can work in conjunction with a lighting console, automatically switching between preset and console control. When the console generates DMX the Preset 10 Architectural goes off-line. The console then operates normally. Upon loss of DMX from the console, the Preset 10 Architectural either returns to its pervious preset or holds the last look (jumper selectable). Other options on loss of DMX, such as hold last look are possible. The PRE10A offers "Radio Button" operation. Where only one preset may be active at time.
Size:
Face Plate: 4.5"h x 2.75"w x 0.2"d
Face Plate Rear Inset: 4.05"h x 2.4"w x 0.1"d
Electrical Box Minimum Inside Dimensions: 3.5"h x 2.1"w x 1.25"d
