Any Items listed at reduced pricing is only valid online not in store
Specifically designed for auditoriums where smooth dimming is essential, the high-performance ArcSystem Pro Drivers provide power and dimming control for Pro One-Cell luminaires, with stepless dimming from 100% to absolute zero and back to full again.
D1 Driver
The D1 Driver is designed to operate with Pro One-Cell and Pro One-Cell Small luminaires, providing a single, addressable output for direct connection to the remote fixture.
A High Output version of the D1 driver providing increased output support for use with the Pro One-Cell High Output luminaire.
Designed specifically for use with the Pro One-Cell Micro luminaire, the D2 driver provides two individually addressable connections and is sized to allow insertion and removal through the smaller ceiling aperture requirements of the Micro.
A larger, wall-mountable driver, the D4 CC 150 provides four individually addressable outputs to power Pro One-Cell and One-Cell Small luminaires
D4 CV drivers are both rack-mountable and wall-mountable and are designed to allow direct connection of 24 VDC CV LED loads, such as LED tape or linear LED strip luminaires. Select from CV 150, 350, and 700 versions.
All drivers have a wide range input from 100-277V and are sized so that they can be installed through cutouts from below the ceiling for recessed luminaire installation. Installation is surprisingly simple with these high-performance drivers.
All ArcSystem drivers and luminaires are available as a dual-input emergency variant, providing UL924 and CE compliant emergency egress lighting solutions. Refer to product datasheets for more information.
For a quick overview of Driver compatibility, review the chart below.
| Pro One-Cell | Pro One-Cell Small |
Pro One-Cell Micro |
Pro One-Cell High Output |
24 VDC CV LED Products |
|
|---|---|---|---|---|---|
| D1 | X | X | |||
| D1 HO | X | ||||
| D2 | X | ||||
| D4 CC 150 | X | X | |||
| D4 CV 150 | X | ||||
| D4 CV 350 | X | ||||
| D4 CV 700 | X |
GENERAL INFORMATION
Designed for use with ArcSystem Pro One-Cell series luminaires, the ArcSystem driver range is a convection cooled LED driver providing superior quality dimming. Each driver type has been specifically optimized for the best possible control of its intended luminaire. With this in mind, the following chart details compatibility of each model:
| DRIVER | SUITABLE FOR USE WITH: |
| D1 Driver | Pro One-Cell / Pro One-Cell Small |
| D1HO Driver | Pro One-Cell High-Output |
| D2 Driver | Pro One-Cell Micro |
| D4 CC Driver | Pro One-Cell / Pro One-Cell Small |
Each D1 Driver provides power and control for one luminaire while the D2 can power up to two Pro One-Cell Micro luminaires. The D4 CC Driver provides power and control for up to four luminaires. Intensity may be controlled directly using a DMX/RDM connection to the driver’s RJ45 connectors.
APPLICATIONS
• Auditoriums
• Worklights
• Lobbies
• Houses of worship
• Museums
• Studios
FEATURES
• Wired DMX/RDM
• Stepless smooth dimming to absolute zero
• Silent operation
• Convection cooled
• Suitable for air handling/plenum use
