$449.00
Share

Shure Wireless Digital Lavalier System

(No reviews yet) Write a Review
Add to Cart

Options

$449.00

Info

SKU:V940-PGX ,Width: ,Height: ,Depth:

Info

SKU:
V940-PGX
MPN:
PGXD14/93

Description

Shure PGXD14/93 Wireless Digital System w/WL93 Lavalier Microphone includes:

  • WL93 Lavalier Microphone, tie clip and windscreen
  • PGXD1 Bodypack Transmitter
  • PGXD4 Wireless Receiver
PGX Digital adds the clarity of 24-bit digital audio to the famed PGX line of Shure wireless products. Offering tailored wireless solutions for vocalists, guitarists, and presenters, PGX Digital combines the trusted legacy of Shure microphones with state of the art, 24-bit digital wireless technology that delivers strong, clean RF performance. The result is wireless audio that sounds like wired, rock-solid RF signal, and simple setup and operation.

The PGX Digital Vocal Wireless System from Shure adds the clarity of 24-bit digital audio to the legacy of trusted Shure microphone options for wireless performance. This system includes the WL93 subminiature omnidirectional condenser lavalier for natural voice reproduction and discreet placement. Also includes tie clip and windscreen. Included: PGXD4 wireless receiver, PGXD1 bodypack transmitter, WL93 lavalier microphone, tie clip, windscreen, padded carrying case.

PGXD1 Bodypack Transmitter with WL93 Lavalier Microphone Features

  • Subminiature lavalier design with inconspicuous mounting hardware for discreet
    placement
  • Smooth extended frequency response with presence rise specially tailored for chestworn
    microphone operation
  • Power, mute, and battery status LED
  • Up to 10 hours of continuous use from 2 AA batteries
  • 200 ft (60 m) operating range
  • Rugged construction for reliable performance show after show
  • Low profile bodypack, easily clips onto belts or clothing

PGXD4 Wireless Receiver Features

  • 24-bit / 48 kHz digital technology for incredibly accurate sound
  • Automatic frequency selection locates a clear channel instantly
  • One-touch sync automatically links the transmitter and receiver
  • True digital diversity for rock-solid wireless signal reliability
  • Up to 10 compatible channels per frequency band
  • ¼” and XLR audio outputs
  • Included padded carrying case for portability and protection

PGXD1 Specifications

  • Audio Input Level: +10 dBV maximum, at minimum gain setting,  -16 dBV maximum, at maximum gain setting
  • Gain Adjustment Range: 26 dB
  • Input Impedance: 1 M ohms
  • RF Output Level: 10 mW maximum (dependent on applicable countryregulations)
  • Dimensions: 108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
  • Weight: 128 grams (4.5 oz.) without batteries
  • Housing: Molded polycarbonate case
  • Power Requirements: 2 “AA” size
  • Battery Life: Up to 10 hours

PGXD4 Specifications

  • Dimensions: 40 mm H X 181 mm W X 104 mm D (1.6 x 7.125 x 4.1 in.)
  • Weight: 289 g (10.2 oz.)
  • Housing: ABS
  • Audio Output Level: (ref. ± 38 kHz deviation, 1 kHz tone): XLR connector (into 3000 O load): -2.5 dBV / 1/4 inch connector (into 10000 O load): +10 dBV
  • Impedance: XLR: 50 O / 1/4 inch: 50 O
  • Sensitivity: -102 dBm @ 10-5 BER
  • Image Rejection: > 70 dB, typical
  • XLR output: Impedance balanced; Pin 1: Ground (cable shield), Pin 2: Audio, Pin 3: No Audio
  • Audio LED: Red: 2 dB below clip, Amber: 12 dB below clip, Green: 50 dB below clip
  • Power Requirements:12-18 Vdc at 150 mA, supplied by external power supply
  • Pin Assignments:XLR: 1=ground, 2=hot, 3=cold6.35 mm (1/4”) TRS: Tip=audio, Ring=no audio,Sleeve=ground

System Specifications

  • Operating Range: 60 m (200 ft.) under typical conditions. Note: actual range depends on RF signal absorption, reflection and interference.
  • RF Carrier Range: X8: 902–928 MHz, X8A: 915–928 MHz, X8B: 902–907.5 MHz, 915–928 MHz (Note: varies by region)
    Audio Frequency Response (± 2dB): 20-20000 MHz
  • System Gain: PGXD2: 0 dB at minimum gain setting, 6.35 mm (1/4“) connector / -12.5 dB at minimum gain setting, XLR output
    PGXD1: -54.5 dBV/Pa at -10 dB gain setting, with SM58 catridge, XLR output
  • Total Harmonic Distortion: <0.02%, A-weighted, typical (Ref. 1 kHz, 6 dB below input clip)
  • Dynamic Range: >108 dB A-weighted
  • Operating Temperature Range: -18°C (0°F) to +50°C (+122°F). Note: battery characteristics may limit this range.

Selecting Frequencies

When you buy or rent a wireless system, someone has to select an operating frequency (for fixed-frequency systems) or an operating frequency range (for frequency-agile systems). To do this job correctly, the dealer will need to know two things, and you will usually need to provide this information. They are:
  • The location or area where the wireless system will be used. Alternately, the channel numbers of the local TV stations can be provided. This allows the dealer to avoid TV frequencies when selecting frequencies.
  • The frequency, model and type of any other wireless microphone systems that will be in use at the same location. This allows the dealer to avoid using the same frequencies,frequencies that are too close together, or frequencies which interact. It also allows the dealer to determine if the maximum possible number of wireless systems will be exceeded. Existing equipment may have the frequency information inside the battery pack area.

Customers Also Viewed